This encoder interface can measure 250,000 quadrature cycles per second at 1000 Hz.

This VINT Hub has six high-speed VINT ports and is ideal for new Phidget systems.

This VINT Hub has a single high-speed VINT port and is great for systems with limited space.

This spatial board has a 3-axis accelerometer, gyroscope and compass with high resolution readings at low magnitudes.

Control position, velocity, and acceleration of 16 RC servos with just one VINT port.

This compact Stepper Phidget gives you control of one bipolar stepper motor from a port on your VINT hub.

Write text and draw pictures to this 128x64px graphic LCD display that connects to a VINT port.

Measure acceleration up to ±8g in each axis with the PhidgetAccelerometer. Connects via USB or VINT.

This board has 4 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.

Control 8 DPDT mechanical relays, switching up to 250VAC/2amp or 200VDC/2amp.

Measure RTDs, thermistors, and other resistance-based sensors with this VINT port adapter.

Measure soil moisture to bring some automation to your next gardening project.

An accelerometer, gyroscope, and magnetometer all in one board. Measuring in 3 axes, it plugs right into your VINT hub.

Measure the DC current running through a wire with this convenient clip-on sensor.

This kit makes it easy to attach a Phidget-compatible connector to your sensor.

This 50kg load cell measures tensile forces (e.g. hanging loads).

This 100kg load cell measures tensile forces (e.g. hanging loads).

This 200kg load cell measures tensile forces (e.g. hanging loads).

This capacitive sensor will switch when it detects human touch, metal, or other capacitance changes within 8mm.

This stainless steel probe type thermocouple is easy to install and plugs into a Phidgets thermocouple board.

This 500kg load cell measures tensile forces (e.g. hanging loads).

This inductive sensor will switch when it detects metallic objects within 8mm.

This 1000kg load cell measures tensile forces (e.g. hanging loads).

This magnetic sensor will switch when a permanent magnet is within 10mm.

This infrared sensor switches when a reflective object within 80cm is present.

This infrared sensor switches when a reflective object within 2m is present.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.